M21200
Technical Specification
Rated Power Bridge Mode 8Ω 3600 Watts @ 1KHz at < 0.5% T.H.D.
Rated Power (2 x 4Ω) 1800 Watts per channel @ 1KHz at < 0.5% T.H.D. both channels driven
Rated Power (2 x 8Ω) 1200 Watts per channel @ 1KHz at < 0.5% T.H.D. both channels driven
Input CMRR > -65dB @ 1KHz
Power Bandwidth 20Hz - 20KHz ; 0, -0.5dB at rated 500 Watts 8Ω power
T.H.D. (2 x 4Ω) < 0.05% @ 900 Watts per channel from 20Hz - 20KHz
T.H.D. (2 x 8Ω) < 0.05% @ 600 Watts per channel from 20Hz - 20KHz
Rated Power (1 x 4Ω) 1980 Watts @ 1KHz at < 0.5% T.H.D.
Rated Power (1 x 8Ω) 1300 Watts @ 1KHz at < 0.5% T.H.D.
Minimum Load Impedance
Maximum RMS Voltage Swing 110 Volt
Frequency Response 10Hz - 50KHz ; +0, -3dB at 1 Watt
Phase Response +20° to -25° from 20Hz to 20KHz
Input Impedance 20KΩ balanced / 10KΩ unbalanced
Cooling Two temperature dependant variable speed 120 mm. high output DC fans
Controls Two front panel attenuators, rear panel mode switch and gain select switch
Voltage Gain 0.775V, 32dB or 26dB
Crosstalk > -60dB @ 1KHz at rated power @ 8Ω
Hum and Noise > -104dB, "A" weighted referenced to rated power @ 8Ω
Slew Rate > 25V/us
Dampling Factor (8Ω) > 800:1 @ 20Hz - 1KHz
Indicator LEDs 2 clip, 2 signal presence, 2 active status, 2 protection
Protection Thermal, DC, turn-on bursts, incorrect loads
Connectors XLR, speakon and binding post speaker output
Construction 16 ga. stell
Dimensions [HxWxD] 132 x 483 x 498 mm.
Net Weight 36 kg.
Gross Weight 39 kg.